Electric Fireplaces

Electric fireplace lifespan is built around components designed to resist wear rather than burn out. With no real flame, EcoSmart Fire electric fireplaces avoid the soot, ash, heat stress, and chimney wear that limit the working life of traditional hearths.

A mild steel satin powder-coat surround and toughened glass screen resist daily knocks and surface marking, while long-life LED lamps produce the Motion and Switch flame effects at the power draw of a household bulb. Fan motors are factory-lubricated and sealed with no user-serviceable parts, and the units carry ETL and CSA certification plus a 12-month limited warranty covering domestic and commercial defects.

Upkeep is straightforward:

• Wipe metal surfaces with a damp cloth and mild soap
• Clean the glass with an ammonia-free cleaner
• Vacuum the vents occasionally to keep airflow clear

No chimney sweep, no gas service, no bulb replacements needed. The fireplace keeps performing with minimal intervention for years on end.

Yes, EcoSmart Fire electric fireplaces can be installed in virtually any room of the house due to their zero-clearance, vent-free design. Unlike traditional fireplaces or gas inserts, they require no chimney, gas line, or external venting, making them suitable for any interior space, from living rooms and bedrooms to offices, kitchens, and even wet environments like bathrooms and laundries where ventilation is available.

Installation requires a dedicated electrical circuit: a 120-volt, 20-amp circuit for standard units, or a 240-volt, 20-amp circuit for higher-capacity models. A qualified electrician should handle the wiring to meet local building codes and safety standards (CSA C22.1 / ANSI/NFPA 70). Maintain a minimum floor clearance of 180 mm [7 in], and avoid mounting directly above heat-sensitive finishes like wallpaper, laminate, or veneer. The zero-clearance construction allows you to frame the unit directly into wood or metal stud walls (load-bearing or non-load-bearing) without structural modifications.

The versatility of placement is one of the key advantages: you can position an electric fireplace in locations where traditional fireplaces simply won't fit. This design freedom means you're limited only by electrical access and your aesthetic vision for the space.

Electric fireplaces require minimal maintenance compared to traditional fireplaces. The LED flame technology produces no ash, soot, or residue, and the lamps are rated for over 20 years of operation, eliminating bulb replacement entirely.

To keep your EcoSmart Fire fireplace in optimal condition, dust the exterior with a soft dry cloth weekly to prevent build-up. Clean the glass with ammonia-free glass cleaner applied to a cloth (never spray directly), then dry with a lint-free cloth to prevent streaks. Wipe air vents with a soft duster to clear dust quarterly.

Always power the unit off at the breaker before any cleaning. Use only mild soapy water on metal surfaces; avoid harsh cleaners or polishes. Plastic components need only mild dish soap and warm water. Never expose the fireplace to water immersion or direct spray.

The decorative media, including engineered driftwood logs or crushed glass, requires no cleaning or replacement. Remote controls need only occasional battery replacement. Electrical and heating components are non-serviceable by consumers; if any part fails, contact EcoSmart Fire support. Well-maintained units operate reliably for years without professional servicing.

Yes, EcoSmart Fire electric fireplace inserts come with a full-function remote control as a standard accessory. Each insert's LED flame technology is fully adjustable from anywhere in the room, covering flame pattern, colour, heat output, sound, and lighting, without approaching the unit.

This dual-control setup pairs the wireless remote with built-in touch controls on the insert itself, so you can adjust ambiance and warmth to match your mood or season. Whether you're fine-tuning the flame intensity during a gathering or switching to flame-only ambiance mode on a warmer evening, the remote gives you instant, precise control over the experience.

The remote arrives in the box alongside the insert, along with decorative driftwood logs and crushed black glass media.

An electric fireplace insert is a wall-mounted heating and ambiance unit with LED flame technology that recesses into framed wall studs, delivering authentic flame visuals without requiring ventilation, gas lines, or chimney installation.

EcoSmart Fire's electric inserts, available in two collections, Motion (featuring Motion Picture Flame Technology) and Switch (with advanced LED customisation), replace outdated fireplaces or integrate into new walls as self-contained units. Both are zero-clearance, vent-free, and UL-listed, making them suitable for homes, apartments, and commercial spaces across the USA and Canada.

Yes, electric fireplaces can operate in flame-only mode, allowing you to enjoy flame effects without any heat output. This gives you complete control over when and how you use the fireplace, activating the flame display independently via remote or touch control while leaving the heating element off.

Flame-only operation consumes minimal electricity, comparable to a standard light bulb, making it ideal for year-round ambience. In warmer months, you get the visual appeal of a fire without overheating your space. In cooler seasons, simply switch the heating element on when you need warmth. EcoSmart Fire electric fireplaces offer three distinct modes: No Heat (flame only), Low Heat, and High Heat, so you can tailor the experience to the season and your comfort level.

This flexibility means you can enjoy the fireplace year-round, whether you're seeking atmosphere on a warm evening or warmth on a cool night.

Electric fireplaces with LED flame technology require minimal maintenance, but a structured care routine preserves their appearance and performance over years of use.

Dust the exterior regularly with a soft, dry cloth to prevent build-up, particularly around the burner housing and vents. Every three months, wipe the glass front with an ammonia-free glass cleaner and a microfibre cloth to maintain clarity without streaking. Also clean the air vents quarterly to ensure airflow remains unobstructed, as dust can accumulate here even though there's no combustion happening.

Twice yearly, apply a clear polymer car wax to any powder-coated metal surrounds. Allow the wax to haze slightly, then buff with a clean microfibre cloth. This keeps the finish protected from fingerprints and environmental wear, maintaining the polished appearance that draws compliments. Avoid harsh chemicals like bleach or ammonia-based products on the surround; mild soap and warm water work perfectly for tougher marks.

The LED flame system itself requires no maintenance. LED technology is rated for over 20 years of operational life, so you'll never need to replace the flame bulbs under normal use. There's no fuel system to service, no chimney to maintain, and no professional servicing required: just these simple routines to keep your fireplace looking its best.

EcoSmart Fire electric inserts do not require special wiring to run on LED flame technology alone. The flame system draws just 42 to 106 W depending on model size, comparable to standard household lighting. Heat output is what determines circuit requirements.

Hardwired models require a dedicated circuit installed by a qualified electrician:

• 120V, 20A circuit for 1,500 W [5,000 BTU/h] output
• 240V, 20A or higher circuit for 3,000 W [10,000 BTU/h] output

The Switch range supports both 120V and 240V configurations and carries ETL certification; the Motion range is CSA-listed. Both meet ANSI/NFPA 70 (NEC) and CSA C22.1 requirements. Plug-in configurations are available on selected models for installations without a dedicated circuit.

No, electric fireplaces don't need to be vented. They operate without combustion, so they produce no emissions, smoke, or harmful gases that require exhaust systems. Unlike bioethanol or gas fireplaces, electric models generate flame and heat through electrical elements and LED technology. No fuel burns inside the unit. With no chimney, flue, gas line, or venting infrastructure needed, the fireplace can go in virtually any room without structural modification. The zero-emission operation also means you retain 100% of the heat you generate, with no energy loss through an external vent.

Electric fireplaces create realistic flame effects by layering LED light through decorative media and toughened glass, producing a composed optical scene with genuine depth. The light source, the objects it illuminates, and the screen you view it through each do a specific job, and the combination produces the realistic effect.

In EcoSmart Fire's electric ranges, low-wattage LEDs (30W to 83W across the range) project flame patterns upward through decorative media such as Western driftwood logs engineered to mimic natural wood, or black crushed glass. Because the light passes through physical objects rather than playing on a flat screen, the flames appear to wrap around the logs and refract off the glass, producing shifting highlights from multiple viewing angles. A toughened glass fire screen sits in front of the assembly, adding a second optical layer that gives the flame perceptible depth, much like the glazing on a real firebox.

Motion Picture Technology drives multi-dimensional flame patterns that stay convincing from across the room or standing alongside, while Switch FX Technology allows the flame shape and accent colour to be adjusted by remote. A wood-crackling soundtrack completes the sensory experience, with no ash, smoke or residue to manage.